CEA Convex Vision

MULTIFUNCTION INVERTER POWER SOURCES FOR MIG-MAG, MMA AND TIG WELDING

Attractive, highly modern design chassis incorporating latest inverter technology and welding process fully digitally controlled are main features of CONVEX Vision series. Innovative, technologically ahead, robust and easy-to-use, they offer premium quality welding in MIG-MAG, MMA and TIG by “lift” mode and represent the best solution for the most qualified welding applications in any industrial field requiring high precision and repeatability of the achieved results. The CONVEX Vision synergic digital control with its innovative color display allows even less expert welders to very easily adjust in a user friendly way all the welding parameters. After choosing the program type according to used material, wire diameter and gas, the control automatically selects the best welding parameters fruit of CEA’s know-how acquired in over 60 years’ experience. At the same time, CONVEX Vision’s offer also most expert welders the possibility of fine tuning and customizing the welding process control, thanks to the ability to access clear, simple and complete under me

Technical Data

Three phase input 50/60 Hz V: 400

Input Power @ I2 Max kVA: 18.6

Delayed Fuse (l2 @ 60%) A: 25

Power Factor / cos φ: 0.90/0.99

Efficiency Degree: 0.88

Open circuit voltage V: 70

Current range A: 10 - 400

Duty cycle at (40°C) A100%: 310

 Duty cycle at (40°C) A 60%: 370

Wires: 0.6 - 1.6

Protection Class IP: 23s

Dimensions: L: 660 mm W:290 mm  H: 515 mm

Weight kg: 39

Features

  • Multifunction equipment with premium welding quality in MIG/MAG, MMA and TIG by “lift” mode
  • Synergic digital control of all the welding parameters
  • User friendly and easy-to-use selection and recalling of the parameters and welding programs
  • Personalized parameters: ability to store personalized welding parameters (JOBS)
  • Excellent arc striking always precise and efficient
  • Total or partial equipment access locking key by password
  • Low Power Consumption results in daily operational cost savings
  • "ENERGY SAVING” function to operate the power source cooling fan and torch water cooling only when necessary
  • Long interconnecting cable: possibility of using up to 50 m length, parameters can be adjusted from the feeder.
  • Use of up/down MIG torches enables the remote adjustment of the welding parameters from the torch
  • Robot interface facility on request
  • Control rack protection cover