WIA Weldmatic 270 Compact

Compact MIG Package

Compact MIG with feature packed integrated wirefeeder, enabling custom set-up to suit the job - including arc start, low wire speed, burnback, spot time, trigger latch, inch, purge and pre and post gas.

Ideal for the Workshop Environment

Economical option for workshops where a separate wirefeeder isn’t required. Works well under a bench.


Easy to move around the workshop, with no messy leads between the power source and wirefeeder.

Easy to Access Controls

All controls are located on the front panel – easy access to all wirefeeder features.

Welds up to 12mm

Fillet weld up to 12mm of mild steel, stainless steel or aluminium.

Reduced Power Consumption

The Fan-on-Demand™ cooling system uses less power and generates less noise by only operating when needed, meaning improved efficiency, less maintenance and a safer working environment.

Low Gas Bottle Tray

The low, easy to access rear tray, allows the gas bottle to be rolled on and off with ease, eliminating the need for lifting.

Built-in Operator Safety

The power source features a built-in thermal protection device that will cut in if the machine is operated beyond its safe thermal operating zone.

Gas or Gasless

Suits gas shielded and gasless flux cored wires.

Spool Capacity

5kg & 15kg.

3 Year Gold Shield Warranty

Every Weldmatic machine is backed by WIA’s industry leading ‘Gold Shield 3 Year Warranty’, covering parts and labour, and supported by an Australia wide service network. You can be guaranteed you’re buying reliability and performance.

Technical Data

Primary Voltage: 240 Vac - 50 Hz

Rated Primary Current: 15 Amps / 25 Amps

Max. Primary Current: 32 Amps / 56 Amps

Recommended Generator kVA: 10 kVA / 13.5 kVA

Rated Output @ 40C (10mins):   200 A, 24 V, 22% Duty Cycle Setting D-1 Max.

Rated Output @ 40C (10mins):       270 A, 27.5 V,20% Duty Cycle

Welding current Range: 30 - 270 Amps

Wire Size Range (mm): 0.6 - 1.2 solid

 Wire Size Range (mm):  0.8 - 1.2 cored

Shipping Weight: 127 kg

What's in the Box

3.6m Euro Gun Cable
5m Work Lead
Gas Regulator/Flowmeter
Drive Rollers: 0.9/1.2mm
“V”; 0.9/1.2mm knurled (gasless)
Tips: 0.6/0.8/0.9/1.2