WIA Weldmatic 396
Complete Industrial MIG Welding Package
This 396 Amp three phase MIG welder is ideal for medium to heavy fabrication, and all general industrial fabrication applications.
Flexibility & Power
Optimal weld characteristics provide high quality results on steel, stainless steel and aluminium, plus the power to comfortably run all popular sizes of solid and flux cored wires. With the capacity to run 1.6mm flux cored wire, the 396 can handle a wide range of applications.
Built-In Operator Safety
The power source features a built-in thermal protection device that will cut in if the machine is operated beyond its safe thermal operating zone.
Ultra-Fast Wire Braking Feature
Featured on the 4RD wirefeeder - leaves the wire tip extra clean at the end of the weld.
Features include:
- ‘Normal’ and ‘creep’ start speed modes.
- Cold wire inch/gas purge controls.
- Pre/post gas timer controls.
Digital Meters
Digital Volt and Amp meters retain last weld information and allow precise set-up.
Fine Arc Control
30 Voltage steps for fine arc control over the whole operating range, from short arc to full spray transfer.
Dual Front Handles
Exclusive split handles with rubber grips, designed to move the machine easily and allow composite work lead and MIG gun to be stored independently.
Gas or Gasless
Suits gas shielded and flux cored wires.
Spool Capacity
5kg & 15kg.
3 Year Gold Shield Warranty
Every Weldmatic machine is backed by WIA’s industry leading ‘Gold Shield 3 Year Warranty’, covering parts and labour, and supported by an Australia wide service network. You can be guaranteed you’re buying reliability and performance.
Technical Data
Primary Voltage: 380/415 Vac - 50 Hz 3 Phase
Rated Primary Current: 15 Amps
Max. Primary Current: 27 Amps
Recommended Generator kVA: 20 kVA
Rated Output @ 40C (10mins): 395A, 34 V 30% Duty Cycle, 250 A, 26 V 100%
Duty Cycle
Welding current Range: 19 - 395 Amps
Wire Size Range (mm): 0.6 - 1.6 solid
Wire Size Range (mm): 0.8 - 1.6 cored
Shipping Weight: 172 kg
What's in the box
W64 4 Roll Drive Wirefeeder
3.6m Euro Gun Cable
Bernard™ Centerfire™ Tip 0.9mm
10m Work Lead
10m Interconnecting Leads
Gas Regulator/Flowmeter
Drive Rollers: 0.9/1.2mm "V", 0.9/1.2 knurled (gasless, flux cored, metal cored)